- Muffle Furnace
- Dental Equipment
- Tube Furnace
- Vacuum Furnace
- Crucible Furnace
- Atmosphere Furnace
- Bottom Loading Furnace
- Industrial Furnace
- Drying Oven
- |- Air drying oven
- |- Vacuum drying oven
- SiC heating element
- MoSi2 Heating element
- Ceramic Fiber Product
- Alumina product
- Agate Mortar & Pestle
- Silicon Nitride protection tube
1.Chamber dimension (working space): 300*300*275mm
2.Capacity: 25 liter
3.Outer dimension: 600*460*460mm
5.Power: 500 w
1. Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, and plating applications.
2. 3" (7.6 cm) glass wool insulation prevents heat loss from working chamber.
3. Exclusive polycarbonate safety shield protects door glass.
4. Digital temperature controller with +/- 1°C accuracy.
5. Maximum Heating Rate: 4~6 ºC/min.
6. Easy-to-clean #304 stainless steel chamber interior.
7. 2 shelves were included for immediate use.
8. CE certificated
9. One year limited warranty
Operating temperature range from room temperature to 300°C Max.(RT ~ 200°C for continuous; 200°C ~ 300°C for <4hrs).
PID precision digital Power controller controls temperature with a uniformity of +/-3°C @ 100°C and built-in over temperature protection.
350X250X250mm (Width*Height * Depth)
250 oC (<4hour)
PID precision Digital Power controller and built-in over temperature protection
± 1 oC
± 3°C over 80 mm @ 100°C
4~6 oC /min
Electric heating pipe
High quality Aluminum silicate fibers
Easy-to-clean #304 stainless steel
●Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.
●3" (7.6 cm) glass wool insulation prevents heat loss from working chamber
●Silicone door gasket and positive latch door maintain seal at all vacuum levels
●Exclusive polycarbonate safety shield protects door glass
110V or 220V, 50HZ/60HZ, 1 phases (As per your order)
Net Weight: about 30kgs
Gross Weight: about 50kgs
● One year limited warranty with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products)
● ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty.
● Cooling rate shall also not exceed 10 °C /min.
● Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
● Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
●Refractory door block must be inserted before closing door.
High temperature gloves
Operation Manual (English version)
Programmable temperature controller